The STYLPRO Mini LED Wand is a portable device featuring Blue (415 nm), Red (633 nm) and NIR (near-infrared, 830 nm) LED light.

⭐ Helps reduce the appearance of redness
⭐ Quick 3 minute sessions
⭐ Portable and travel-friendly
⭐ Morning, Day and Evening Modes
⭐ Non-invasive

⚡Red LED light (633 nm)
⚡Blue LED light (415 nm)
⚡Near-infrared (830 nm) LED light
⚡28x Bright LEDs
⚡3 Modes
⚡Rechargeable
⚡Compact design
⚡3-minute auto-off timer

Charging:
The LEDs will all flash when the battery is low. Insert the USB-C cable (provided) into the port under the head of the device. Attach to a USB-C-compatible power source. The red LED in the middle of the device will flash when charging. No LEDs will flash when the device is fully charged.

How to use:
🖤 HOW TO USE
🖤 Ensure your skin is cleansed and dry before use. Any skincare or makeup can block the light so the device may not work. Long press the on/off button to turn the Mini LED Wand on.
🖤 Switch on. Do not look directly into the LEDs. Depending on the time of day, select Mode 1 , 2 or 3. Apply the device to the area you wish to focus on, ensuring the light is directed onto the skin. All three modes can be used within the same day. The device can be used around the eye, but do NOT apply directly over the eye or on the eyelids.
a. Mode 1 MORNING - the device will automatically be set to this mode when switched on. Use this mode in the morning. (Do not use this Mode more than once a day on the same area)
b. Mode 2 DAYTIME - short press once on the on/off button to switch to daytime mode. Use this mode during the day. (Do not use this Mode more than 3x a day on the same area)
c. Mode 3 EVENING - short press twice on the on/off button to switch to evening mode. Use this mode before bed. (Do not use this Mode more than once a day on the same area)
🖤 Hold the device against your skin until the light auto-switches off after 3 minutes.
🖤 Repeat on all areas of concern.
🖤 Wipe the device clean after use (see cleaning instructions).

CLEANING AND MAINTENANCE:
🖤 Ensure device is switched off.
🖤 Wipe the surface of the LEDs with water wipes or damp cloth to remove any residue from skin oils.
🖤 Clean the device body by using damp or microfibre cloth.
🖤 Allow the device to dry completely prior to use.

✅ 1 x STYLPRO Mini LED Wand
✅ 1 x USB-C Charging Cable